Woven Fabrics, Medium Weight With No Stretch

    Instant PDF Download DIY Stuffed Dress Form in Standard Sizes 2-14 Sewing Patterns in Letter Format.

    $37

    Exclusive DIY Stuffed Dress Form in Standard Sizes 2-14. Includes 7 Sewing Patterns in Letter Format, Complete Step-by-Step Sewing Photo-Guide.

    Join our DIY Dress Form Support Group on Facebook and follow us on Instagram @bootstrapfashion

    This is NOT a customized pattern and is available as Standard Sized downloaded PDF patterns in Letter format. Sew your own pinnable Dress Form from scratch for better, more better fittings, pattern drafting, and draping. No extra dress forms or body taping is needed for this project.

    We included an explainer video, please scroll down to watch. Proceed to check out, as usual, using PayPal at the check out (or other payment methods such as Store Credit etc).

    What you will need:

    1. Self (Main) fabric: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m)

    2. Fabric-based fusible woven interfacing: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m) 3. Interlining/stabilizer – from 3/4 yards (0.80 m) to 1 1/4 yards (1m)

    4. Cardboard 6 sq.ft (0.6 sq.m).

    5. Sponge 3" (8 cm) in height, 7" (18cm) in width and 7" (18cm) in length; or stack 2x1.5" or 3x1" sponges.

    6. Zipper 7”-9” (18-23 cm) – 2 pieces.

    7. Craft glue.

    8. Small razor knife.

    9. Wooden, plastic or metal coat rack stand. The stand should be cut to reflect your height. The length of the stand is automatically calculated by the system and is listed on your pattern. You can also use a pre-manufactured adjustable dress form stand, which should not be cut. We provided the resources and links where you can buy the pre-manufactured stand and other supplies below. We did not use a pre-manufactured stand and the process might slightly differ from the proposed by us. You will need to know the diameter of the premanufactured stand and purchase a plastic tube (next point) to fit over the manufactured stand.

    10. Plastic pipe tube, diameter from 1 1/8” (3 cm) to 2” (5 cm). We recommend buying a 38" long pipe for standard heights and 48" for very tall. You will have to cut the pipe to the length, recommended on the pattern. This length is automatically calculated by the system to fit your unique height.

    11. Polyester Fiber Fill Poly-Fil: 5lb (2.3 kg) (smaller sizes) to 10lb (4.6 kg) (larger and plus sizes).


    BootstrapFashion License Information: Limited Commercial and Personal Use. The limited Commercial license is a non-exclusive license, which allows for selling of the finished dress forms in unlimited quantities for profit. However, resale of this pattern is strictly forbidden.

    Instant PDF Download DIY Stuffed Dress Form Sewing Pattern in Standard Plus Sizes 16-28.

    $37

    Instant PDF Download DIY Stuffed Dress Form Sewing Pattern in Standard Plus Sizes 16-28. Includes 7 Sewing Patterns in Letter (8.5"x11") Format, Complete Step-by-Step Sewing Photo-Instructions.

    Join our DIY Dress Form Support Group on Facebook and follow us on Instagram @bootstrapfashion

    Please note that this is NOT a customized pattern and is available as Standard Sized instant download PDF patterns. Sew your own pinnable Dress Form from scratch for better fittings, pattern drafting, and draping. No extra dress forms or body taping is needed for this project.

    We included an explainer video, please scroll down to watch. Proceed to check out, as usual, using PayPal at the check out (or other payment methods such as Store Credit etc).

    What you will need:

    1. Self (Main) fabric: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m)

    2. Fabric-based fusible woven interfacing: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m) 3. Interlining/stabilizer – from 3/4 yards (0.80 m) to 1 1/4 yards (1m)

    4. Cardboard 6 sq.ft (0.6 sq.m).

    5. Sponge 3" (8 cm) in height, 7" (18cm) in width and 7" (18cm) in length; or stack 2x1.5" or 3x1" sponges.

    6. Zipper 7”-9” (18-23 cm) – 2 pieces.

    7. Craft glue.

    8. Small razor knife.

    9. Wooden, plastic or metal coat rack stand. The stand should be cut to reflect your height. The length of the stand is automatically calculated by the system and is listed on your pattern. You can also use a pre-manufactured adjustable dress form stand, which should not be cut. We provided the resources and links where you can buy the pre-manufactured stand and other supplies below. We did not use a pre-manufactured stand and the process might slightly differ from the proposed by us. You will need to know the diameter of the premanufactured stand and purchase a plastic tube (next point) to fit over the manufactured stand.

    10. Plastic pipe tube, diameter from 1 1/8” (3 cm) to 2” (5 cm). We recommend buying a 38" long pipe for standard heights and 48" for very tall. You will have to cut the pipe to the length, recommended on the pattern. This length is automatically calculated by the system to fit your unique height.

    11. Polyester Fiber Fill Poly-Fil: 5lb (2.3 kg) (smaller sizes) to 10lb (4.6 kg) (larger and plus sizes).


    BootstrapFashion License Information: Limited Commercial and Personal Use. The limited Commercial license is a non-exclusive license, which allows for selling of the finished dress forms in unlimited quantities for profit. However, resale of this pattern is strictly forbidden.

    Exclusive! Curvy, Plus Size DIY Stuffed Dress Form Made To Measure Sewing Pattern.

    $26

    Exclusive! Made To Measure Curvy, Plus Size DIY Stuffed Dress Form. Body Replica Custom-Fit Sewing Pattern and a Complete Step-by-Step Sewing Photo-Guide


    Join our DIY Dress Form Support Group on Facebook and follow us on Instagram @bootstrapfashion

    Sew your own pinnable Custom-Fit Dress Form from scratch for better, more accurate fittings, pattern drafting, and draping. No extra dress forms or body taping is needed for this project. You can replicate your figure by customizing belly protuberance, buttocks shape, posture and shoulder slope. In addition to our Fit Adjustments, you can add neck circumference, back width and other key measurements.

    This pattern is NOT suitable to be put on a finished dress form and is meant to be fully stuffed with polyfil. The dress form sewing pattern will have a negative ease built in, which will allow for better measurement control during stuffing and the stuffed dress form will expand during the stuffing process to match you measurements.

    Please do not try on the shell, as it will NOT fit you. If you want to make a dress form cover to cover your existent dress form, please add 10% to your Bust and Waist circumference.

    We included an explainer video, please scroll down to watch. Double check your measurements and proceed to check out, as usual, using PayPal at the check out (or other payment methods such as Store Credit etc).

    What you will need:

    1. Self (Main) fabric: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m)

    2. Fabric-based fusible woven interfacing: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m) 3. Interlining/stabilizer – from 3/4 yards (0.80 m) to 1 1/4 yards (1m)

    4. Cardboard 6 sq.ft (0.6 sq.m).

    5. Sponge 3" (8 cm) in height, 7" (18cm) in width and 7" (18cm) in length; or stack 2x1.5" or 3x1" sponges.

    6. Zipper 7”-9” (18-23 cm) – 2 pieces.

    7. Craft glue.

    8. Small razor knife.

    9. Wooden, plastic or metal coat rack stand. The stand should be cut to reflect your height. The length of the stand is automatically calculated by the system and is listed on your pattern. You can also use a pre-manufactured adjustable dress form stand, which should not be cut. We provided the resources and links where you can buy the pre-manufactured stand and other supplies below. We did not use a pre-manufactured stand and the process might slightly differ from the proposed by us. You will need to know the diameter of the premanufactured stand and purchase a plastic tube (next point) to fit over the manufactured stand.

    10. Plastic pipe tube, diameter from 1 1/8” (3 cm) to 2” (5 cm). We recommend buying a 38" long pipe for standard heights and 48" for very tall. You will have to cut the pipe to the length, recommended on the pattern. This length is automatically calculated by the system to fit your unique height.

    11. Polyester Fiber Fill Poly-Fil: 5lb (2.3 kg) (smaller sizes) to 10lb (4.6 kg) (larger and plus sizes).


    © BootstrapFashion License Information: Limited Commercial and Personal Use. The limited Commercial license is a non-exclusive license, which allows for selling of the finished dress forms in unlimited quantities for profit. However, resale of this pattern is strictly forbidden.

    Exclusive! DIY Pant Form Mannequin/Dummy, Custom Made-to-Measure Fit Exclusive! DIY Pant Form Mannequin/Dummy, Custom Made-to-Measure Fit
    • New

    Exclusive! DIY Pant Form Mannequin/Dummy, Custom Made-to-Measure Fit

    $26

    Sew your own pinnable Custom-Fit Leg Form from scratch for better, more accurate bottom fittings, pattern drafting, and draping. No extra dress forms or body taping is needed for this project. You can replicate your figure by customizing belly protuberance, buttocks shape.

    This pattern is NOT suitable to be put on a finished dress form and is meant to be fully stuffed with polyfil. The dress form sewing pattern will have a negative ease built in, which will allow for better measurement control during stuffing and the stuffed dress form will expand during the stuffing process to match you measurements.

    Please do not try on the shell, as it will NOT fit you.

    We included an explainer video, please scroll down to watch. Double check your measurements and proceed to check out, as usual, using PayPal at the check out (or other payment methods such as Store Credit etc).

    What you will need:

    Self (main) fabric:

    Small to large sizes - 1 ¼ yards or 1,1m.

    Large to extra large sizes -1 ¾ yards or 1,5m.

    Plus sizes - 2 ⅛ yards or 2,0m.

    Fabric based fusible woven interfacing:

    Small to large sizes - 1 ¼ yards or 1,1m.

    Large to extra large sizes - 1 ¾ yards or 1,5m.

    Plus sizes - 2 ⅛ yards or 2,0m.

    Interlining/stabilizer - from ¾ yards or 0,8m to 1 ¼ yards or 1,0m.

    Cardboard 6 sq.ft(0,6 sq.m).

    Zipper 7”- 9” or 18 - 23cm, 2 pieces.

    Small razor knife.

    Polyester fiber fill poly-fill: 5lb or 2,3kg, (smaller sizes) to 10lb or 4.6kg (larger and plus sizes).



    © BootstrapFashion License Information: Limited Commercial and Personal Use. The limited Commercial license is a non-exclusive license, which allows for selling of the finished dress forms in unlimited quantities for profit. However, resale of this pattern is strictly forbidden.

    Exclusive! Missy Fit DIY Stuffed Dress Form Body Replica Made To Measure Sewing Pattern.

    $26

    Exclusive! Missy Fit Made To Measure DIY Stuffed Dress Form Body Replica Custom-Fit Sewing Pattern and a Complete Step-by-Step Sewing Photo-Guide

    Join our DIY Dress Form Support Group on Facebook and follow us on Instagram @bootstrapfashion

    Sew your own pinnable Custom-Fit Dress Form from scratch for better, more accurate fittings, pattern drafting, and draping. No extra dress forms or body taping is needed for this project. You can replicate your figure by customizing belly protuberance, buttocks shape, posture and shoulder slope. In addition to our Fit Adjustments, you can add neck circumference, back width and other professional key measurements.

    This pattern is NOT suitable to be put on a finished dress form and is meant to be fully stuffed with polyfil. The dress form sewing pattern will have a negative ease built in, which will allow for better measurement control during stuffing and the stuffed dress form will expand during the stuffing process to match you measurements.

    Please do not try on the shell, as it will NOT fit you. If you want to make a dress form cover to cover your existent dress form, please add 10% to your Bust and Waist cirmumferences.

    We included an explainer video, please scroll down to watch. Double check your measurements and proceed to check out, as usual, using PayPal at the check out (or other payment methods such as Store Credit etc).

    What you will need:

    1. Self (Main) fabric: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m)

    2. Fabric-based fusible woven interfacing: Small to Large sizes –1 ¼ yards (1.10 m), Large to Extra Large sizes –1 ¾ yards (1.50 m) Plus Sizes – 2 1/8 yards (2 m) 3. Interlining/stabilizer – from 3/4 yards (0.80 m) to 1 1/4 yards (1m)

    4. Cardboard 6 sq.ft (0.6 sq.m).

    5. Sponge 3" (8 cm) in height, 7" (18cm) in width and 7" (18cm) in length; or stack 2x1.5" or 3x1" sponges.

    6. Zipper 7”-9” (18-23 cm) – 2 pieces.

    7. Craft glue.

    8. Small razor knife.

    9. Wooden, plastic or metal coat rack stand. The stand should be cut to reflect your height. The length of the stand is automatically calculated by the system and is listed on your pattern. You can also use a pre-manufactured adjustable dress form stand, which should not be cut. We provided the resources and links where you can buy the pre-manufactured stand and other supplies below. We did not use a pre-manufactured stand and the process might slightly differ from the proposed by us. You will need to know the diameter of the premanufactured stand and purchase a plastic tube (next point) to fit over the manufactured stand.

    10. Plastic pipe tube, diameter from 1 1/8” (3 cm) to 2” (5 cm). We recommend buying a 38" long pipe for standard heights and 48" for very tall. You will have to cut the pipe to the length, recommended on the pattern. This length is automatically calculated by the system to fit your unique height.

    11. Polyester Fiber Fill Poly-Fil: 5lb (2.3 kg) (smaller sizes) to 10lb (4.6 kg) (larger and plus sizes).


    © BootstrapFashion License Information: Limited Commercial and Personal Use. The limited Commercial license is a non-exclusive license, which allows for selling of the finished dress forms in unlimited quantities for profit. However, resale of this pattern is strictly forbidden.

    Custom-Fit Sewing Patterns - Exclusive!! Classic Front Closure Corset, Includes Detailed Sewing Instructions

    $17

    Fabric: 75cm/ 30”
    Coutil: 120cm/ 48”


    You will also need:
    Fusible Interfacing
    151cm or 60” Polyester/Nylon Piping
    169cm x 1.2cm or 67” x 1/2“ Bias Binding
    20 Eyelets With Washer
    5 Loop Steel Busk (36cm or 15” max length)
    580cm x 0.6cm or 230” x 1/4” Spiral Steel Boning
    Cord





    Important: For plus sizes please use Fit Adjustments to add more fullness to the bust, hips and upper arm. Additionally, we recommend to make a muslin of your pattern to test the fit and desired look.

    BootstrapFashion License Information: Open Source/Royalty Free

    New and Improved Fitting Pattern! Exclusive CustomFit Sewing Patterns - Sloper (Basic Block) Woven with Waist Darts

    $17

    Ease chart
    Bust: 4 cm (1 5/8")
    Waist: 4 cm (1 5/8")
    Hips: 4 cm (1 5/8")


    Self Width (Main Fabric): 56"
    Length: 2.5 yards.


    You will also need:
    1 Invisible Zipper
    Fusible Interfacing




    Important: For plus sizes please use Fit Adjustments to add more fullness to the bust, hips and upper arm. Additionally, we recommend to make a muslin of your pattern to test the fit and desired look.

    BootstrapFashion License Information: Open Source/Royalty Free

    New and Improved Fitting Pattern! Exclusive CustomFit Sewing Patterns - Sloper (Basic Block) Woven with Sleeve Dart

    $17

    Ease chart"
    Bust: 4 cm (1 5/8")
    Waist: 4 cm (1 5/8")
    Hips: 4 cm (1 5/8")


    Self Width (Main Fabric): 56"
    Length: 2.5 yards.


    You will also need:
    1 Zipper
    Fusible Interfacing




    Important: For plus sizes please use Fit Adjustments to add more fullness to the bust, hips and upper arm. Additionally, we recommend to make a muslin of your pattern to test the fit and desired look.

    BootstrapFashion License Information: Open Source/Royalty Free

    New and Improved Fitting Pattern! Exclusive CustomFit Sewing Patterns - Raglan Woven Sloper (Basic Block)

    $17

    Ease chart"
    Bust: -3 cm (1 1/8")
    Waist: -2 cm (3/4")
    Hips: 0 cm (0")
    Armhole: -1cm (3/8")

    Self Width (Main Fabric): 56"
    Length: 2.5 yards.


    You will also need:
    1 Invisible Zipper
    Fusible Interfacing




    Important: For plus sizes please use Fit Adjustments to add more fullness to the bust, hips and upper arm. Additionally, we recommend to make a muslin of your pattern to test the fit and desired look.

    BootstrapFashion License Information: Open Source/Royalty Free

    New and Improved Fitting Pattern! Exclusive CustomFit Sewing Patterns - Pants Sloper with Waistband

    $17
    This basic woven pant sloper has a front mock fly, waistband and it is fitted at hips; it has one dart in the front and back, which makes it easy to style and add fit modifications. You can create your own pant designs by simply adding pockets, yokes and creating different leg opening widths and inseam lengths. The raise is designed to hit at the natural waist. The buttocks are adjustable to fit your unique figure type


    Self Width (Main Fabric): 56"
    Length: 2.5 yards.
    You will also need:
    1 zipper
    Important: For plus sizes please use Fit Adjustments to add more fullness to the bust, hips and upper arm. Additionally, we recommend to make a muslin of your pattern to test the fit and desired look.

    BootstrapFashion License Information: Open Source/Royalty Free

    FOLLOW US ON+